蘇州*Qi3537種類多價格優產品說明:
JTONE品牌Qi3537*是在聽取了*血液病專家的意見后,根據多家*醫院血液科醫務人員對血細胞分類計數的要求研制開發的,共設有四種計數方式(骨髓、血片、巨核、組化),是目前國內功能zui完整的*。
蘇州*Qi3537種類多價格優操作說明:
I. Operation
1、 開機顯示:
1. Display of starting up
Qi3538 CELL COUNTER |
清零 Clear | 1原始 Original | 2幼稚 Infantility | 3中幼 Parenchymula | 4晚幼 Metamyelocyte | 5異淋 Anisotropic lymphocytes | 6其它 Other | 減1 Minus1 |
總數設置 Amount setting | 7桿狀 Rhabditiform | 8分葉 Lobulated | 9淋巴 Lymph | 10單核 Monokaryon | 11嗜酸 Acidophilic | 12嗜堿 Basophilic | %百分比 Percent |
注意:
Note:
(1)開機總數自動設定為100,可按總數設置鍵改變總數。方法為:
*次按總數設置鍵,顯示當前所設的總數,再按該鍵則加100,
依次到達zui大500,再按則回到100,循環為100 – 200 - 300 – 400 – 500。 當顯示的總數您認為合適時,即可按細胞鍵進入數。
(1) The automatic amount when starting up is 100; it can be changed using amount setting key. The method is as follows: press total amount setting key at the first time, the total amount will display, and then press this key again to add 100 until it becomes 500, and then press again, it will be 100 again; the circulation is 100 - 200 - 300 - 400 - 500. You can press cell key to enter the number if the total amount is appropriate.
(2)鍵盤上每一個細胞上方都有對應的一個數字,是為方便顯示設計
的,如數字9就表示對應的細胞為淋巴。
(2) Every cell has a corresponding number on keyboard, which is for the convenience of display, for example, the number 9 means lymph.
(3)其它鍵能定義未給出的任意細胞。
(3) Other keys can define the random cell which has not been given.
(4)由于顯示的是數字代號,所以各按鍵可重新定義,滿足其它細胞
計數,如進行細胞染色計數等。
(4) Each key can be redefined to satisfy other cell counting; for example, it can be used in cell dyeing counting.
(5)英文縮寫意義:
(5) English abbreviation meaning
NUM-----細胞對應代號 Number of cell QTY------細胞個數 Cell quantity TOTAL----總數 Total amount
%---------百分比 Percent PC(%)----- 百分比Percent
2、按細胞鍵則進入計數,顯示如下:
2. Press cell key to enter in counting as follows:
NUM QTY TOTAL 1 1 1 |
當總數每次到達整百時,鳴響3聲提示,當計數到達設定的總數時,鳴響5聲提示。再按細胞鍵,顯示:
If the total amount reaches hundred, it will resound 3 times, and if the total amount reaches the setting amount, it will resound 5 times. Then you can press cell key, it will display
COUNT TOTAL= xxxx SET TOTAL= xxxx |
按動%鍵,可查看所計細胞的個數和百分比。顯示格式為:
Press % key, you can check quantity and percent of cells as follows:
NUM QTY PC(%) 6 20 4.00% |
6、按任何鍵均鳴響一聲,提示按鍵有效;當按錯細胞鍵時,可按減1
鍵減去。
6. If you press any key effectively, it will resound; when you press wrong cell key, you can press key 1 to minus.
7、雖然設置了總數,但允許未計到設定的總數時按動%鍵,按動%
鍵后,不能再繼續計數。
7. Although you set the total amount, you can press % key when the amount has not reach setting amount; and after that, you cannot continue to count again.
8、結束分類計數,要讀取分類結果時可按動%鍵,則從1號鍵開始顯
示分類結果,未計數的細胞顯示為0,可按任意細胞鍵察看該鍵分
類結果。
8. When the counting has been finished, you can press % key to read classification results, and the results will be displayed from key 1, the cell has not been counted will show 0, and you can press any cell key to read the classification result of this key.
9、要進行下一例分類計數,必須按清零鍵,以清除上例結果,但上
次設置的總數不變。
9. If you want to carry on the next classification counting, you can press clear key to clear results above, but the setting total amount is invariable.
10、如果顯示屏顯示的字母變暗,則表示供電電壓太低,請注意更換
電池。
10. If the voltage is low, the letters on display screen will become dark, please replace battery.
二、使用注意事項:
II. DIRECTIONS:
1、 該機為交直流兩用供電方式,將外接穩壓器輸出插頭插到計數器后
插孔,電池供電斷開,有外接穩壓器供電;拔掉外接穩壓器器輸出
插頭,則有電池供電。外接穩壓器器輸出插頭請勿經常隨意拔出,
以免接觸不良,常期不用電池供電,請將電池取出。使用完畢,
將開關置OFF位置,拔掉外接穩壓器220V輸入插頭。
1. This machine is in AC-DC power supply way, and when plug the output plug of external manostat in the counter jack, the battery power supply will off, and the external manostat will supply power; when cut off external manostat, the battery will supply power. Please do not cut off external manostat output plug optionally to avoid poor contact; and please take out the battery for disuse over a long period of time. After using, please set the switch at OFF position, and pull the 220V input plug of external manostat.
2、 禁止擠壓、扭曲、碰撞和私自拆卸,如出現故障,請與本公司,
該機保修一年,終身維護,屬使用不當而非產品質量問題造成器
件損壞,維修時酌情收費。
2. No extrusion, distortion, collision and disassembling privay. Please contact us if there is any problem. This machine has one-year maintenance period and lifelong maintenance period. And we will charge according to the circumstances if the problem is not led by product quality but misuse.
三、額定環境工作條件:
III. Fixed environment working condition
1、 交流電源電壓:220v ±10% 50HZ;
或電池供電:4節5號(1.5V)電池,注意方向請勿放置反。
1. Alternating current power supply voltage:220V ±10% 50HZ;
Or battery power supply: 4 No.5 (1.5V) batteries, please do not lay aside instead.
2、使用環境:
2. Use environment
溫度:0~40℃;相對濕度:£80%;
大氣壓力:750MM汞高
80%;£Temperature: 0~40℃; Relative humidity:
Atmospheric pressure: the 750MM mercury height
主要特征:
功能: | *設置了四種計數方式(血片、單獨巨核、簡易骨髓、組化),可對32種細胞計數,功能分:粒/紅、髓/紅比,粒系總數、紅系總數、巨系總數及細胞個數和百分比。采用16*2大字符液晶顯示,交直流兩種供電方式,方便實用。 |
粒系: | 原粒、早粒、中粒、晚粒、桿狀、分葉、嗜酸、嗜堿 |
紅系: | 原紅、早紅、中紅、晚紅、巨早、巨、日晚、其它1 |
巨系: | 原始、幼稚、顆粒、產板、裸核、小原、小幼、小巨 |
其它: | 原始、幼稚、漿、網狀、淋巴、異淋、單核、其它2 |
組化: | -、+、++、+++、++++ |