油水分離器詳細介紹
|
油水分離器技術性能 ACO Fresh Grease Separator for Manual Operation ACO 亞科手動操作的新鮮油脂分離器 LIPATOR NS… (2/4/7/10/15/20) Grease Separator Plant Ready for Connection: 成品油脂分離器設備包含以下連接: ■ Housing and bottom part of stainless steel, material grade 1.4301 (SS 304); 不銹鋼(等級SS304)外殼和底座; ■ With heating cartridge on upper cone to homogenize the grease, 230 V / 1.5 kW; 帶電加熱氈, 覆蓋于設備上錐部, 使油脂呈均勻液化狀態,230V / 1.5kw; ■ Inlet / Outlet DN…according to DIN EN 877 - SML pipe; 入口/出口DN…為SML管(排水鑄鐵管)接口, 符合DIN EN 877標準; |
|
■ With ball valve (manual operation) DN 50 for grease and sludge extraction, collecting containers 60 liter for grease and sediment sludge, cover with hose connection; 帶DN50 球閥(手動控制), 分別控制油脂和污泥的抽取, 并排放至2 個60 升的廢油和廢渣收集桶, 該桶蓋上設有軟管連接口; ■ 2 replacement containers 60 liter capacity with cover; 2 個60 升帶蓋子的替換收集桶; ■ Agitating device with 1-phase A.C. motor in bottom part of housing, 230 V / 90 W; 在該分離器底部設有由單相電機驅動的攪拌裝置, 230V / 90w; ■ Manual diaphragm pump to increase pressure for grease draw off; 手動隔膜泵, 可提升壓力以利于油脂的分離排放; ■ Grease extraction and ventilation bridge; 設有通氣橋, 保證進出水口和容器內部的空氣流通; ■ Electric connection 230 V / 50/60 Hz / 1.6 kW. 電氣連接為: 230V / 50/60Hz / 1.6kw. |
油水分離器技術參數
|