Model: MPS51
Capacity: 0~20MPa
Features:
● small volume, light weight
● suitable for threaded installation in small space
● static or dynamic pressure measurement with a short response time
Specifications:
Measurement range | 0～1KPa～5MPa （measurement medium is a dry and non-corrosive gas） 0～500KPa～20MPa（measurement medium is a non-corrosive and non-conducting liquid） |
Pressure type | Absolute pressure, manometer pressure and sealed manometer pressure(balance pressure catheter at the outlet line of manometer pressure sensor) |
Pressure overload | Double rated pressure |
Full range output | ≥40mV |
Natural frequency | ≥10KHz |
Input resistance | ≥10KΩ |
Output resistance | ≥6KΩ |
Zero voltage | ＜±2%F.S |
Non-linearity | ＜±0.5%F.S |
Repeatability and hysteresis | ＜±0.3%F.S |
Operating temperature range | -55℃～120℃ |
Compensated temperature range | -20℃～25℃ or 20℃～80℃ |
Zero temperature drift | ＜±2%F.S/55℃ |
Order guide:
Model | Capacity (KPa） | Outptu signal | Screw thread | Length | Cable length(m) | other |
MPS51 | ||||||
Order example：MPS51―100Kpa manometer pressure－0~5V―M5―30mm―0.5 | ||||||
Dimensions:
Remarks:
1）The cable is a 4-core shield wire with a diameter of 1.7mm
2）Dimensions can be customized according to customer’s request
首先大家需看出廠設置，不校正，承受力看一下稱重傳感器的顯示屏值有沒有轉變。隨后再校正，看一下稱重傳感器的顯示屏承受力后，力值有沒有轉變。
大家再把傳感器拆裝下來，用萬用表量一下電阻是不是正常的，正常是電阻輸出線（綠白輸出線一組，紅黑輸出線一組）是350Ω±10或是是710Ω±10，這個是傳感器滿載狀況下電阻的輸出。每一個傳感器的輸出不一樣，稱重傳感器的合格證書或是稱重傳感器的銀白色標識，正常的全是標有的，假如確定不清楚多少錢話，只有找問生產廠家了。
可以依據微型稱重傳感器價格的表面分辨，s形液壓式稱重傳感器的線有沒有損傷，劃傷，毀壞。稱重傳感器有沒有超負荷，稱重傳感器假如超負荷過多得話，傳感器的外觀設計會出現一點轉變，例如傳感器變彎，高低不平這些狀況。假如稱重傳感器路線損傷了，大家可以用電鉻鐵剪掉壞的哪段，顏色對顏色再次接好。
