The Dacell DN-100 and DN-200 have designed specifically to operate with strain gauge sensors such as Fast - measurement of Load cell, Torquemeters, Pressure Transducer, LVDT, etc.
該產品為需要特殊操作的應變計傳感器設計，如快速稱重傳感器，扭矩傳感器，壓力傳感器，LVDT等，安裝簡單、快速，僅使用四個按鈕的快速操作。
DN100 : sampling speed : Appr. 5000Times Per Second
DN200 : sampling speed : Appr. 1000Times Per Second
High resolution
High precision and stability
Quick sampling speed
UNIT CONVERSION : kg, N, ?b, kg/?, bar, MPa
Display part and analogue zero by auto zero(DAC)
Relay output : Hi, Low, NG, OK.
Watch dog
Calibration of actual load and sensor output value
Peak & sample hold, Average hold
參數 | DN100 | DN200 |
應用傳感器 | Strain guage sensors | |
傳感器供電電壓 | DC 5V, 4個傳感器 (350Ω) | |
零點調整范圍 | 00%F·S (Auto Zero) | |
輸入范圍 | 0.5 - 3mV/V | |
顯示 | -19999 - +99999 | |
字符高度 | 7Segment 14mm & 10mm | |
小數點 | Random setting available | |
A/D converter | 16bit 5000 times/sec | 24bit 1000 times/sec |
D/A converter | 16bit 1000 times/sec | 16bit 1000 times/sec |
繼電輸出 | Contact capacity : AC250V 5A , Relay life time : more than 5,000,000 times | |
零點偏差 | Within 0.5μV/℃ | |
靈敏度變化 | Within 0.01%/℃ | |
電壓輸出 | DC 0 - 10V (4-20mA : in accordance with customer request) | |
使用溫度范圍 | -10℃ - 60℃ | |
濕度 | Less than 80% RH (no dew condensation) | |
電源 | AC 85 ~ 265V 50/60Hz | |
選配 | Weight: 1000g | |
OP-01 : BCD output | ||
OP-02 : RS232C serial interface | ||
OP-03 : RS485 Multi drop interface | ||
OP-04 : RS422A serial interface | ||
OP-06 : Power 24VDC | ||
訂貨型號
DN-100
DN-200
相關型號
DN-150 數字儀表
DN-250 數字儀表
