JFEM電機引接線

返回列表頁

參考價: ￥ 10

訂貨量: ≥1

具體成交價以合同協議為準

產品型號

品牌

廠商性質生產商

所在地淮安市

在線詢價收藏產品查看聯系電話

聯系方式：王為香查看聯系方式

更新時間：2018-03-30 19:07:37瀏覽次數：1259次

聯系我時，請告知來自環保在線

產品分類 品牌分類

  電機引接線

JFEM電纜JFEM電機引接線JFEM電機引出線

全部產品列表

  其他品牌

江蘇春晨電纜有限公司

經營模式：生產廠家

商鋪產品：60條

所在地區：江蘇淮安市

聯系人：王為香（經理）

詢價 給他留言

產品簡介

江蘇春晨電纜有限公司專業生產JFEM電機引接線，2、工作溫度＋90℃；　　3、額定電壓為6000V；
　　4、導體單絲采用0.40的鍍錫銅絲，或0.25的鍍錫銅絲，
　　5、電纜敷設時允許彎曲半徑應不小于電纜外徑的4倍。

詳細介紹

江蘇春晨電纜有限公司：http://huikor.com/company/detail/536457.html

江蘇春晨電纜有限公司專業生產JFEM電機引接線，2、工作溫度＋90℃；JFEM電機引接線
　　3、額定電壓為6000V；
　　4、導體單絲采用0.40的鍍錫銅絲，或0.25的鍍錫銅絲，
　　5、電纜敷設時允許彎曲半徑應不小于電纜外徑的4倍，For XLPE insulated power cable, either chemical method or physical
method is employed to transform the molecular structure of PE from
chain into three-dimensional network,i.e. thermoplastic PE is transformed
into thermosetting XLPE. After cross-linking,the thermal and mechanical
properties of PE have been gratly improved while its excellent electrical
property are still retained.
The maximun permissible operating temperature of the conductor
of a XLPE insulated power cable is 90℃ which s higher than that
ofpaper,PVC or PE insulated power cable.The cable has the advantage
of simplicity in construction,lightness in weight,convenience in application
besides its xecellent electrical,thermal,mechanical and anti-chemical
corrosion properties.It can also be laid with no limitation of level defference
along the route.
本產品適用于工頻額定電壓3.6/6kV ～ 26/35kV 輸配電線路
作配送電能之用。
The product is suitable for use in power transmission and distribution
ilnes with rated power frequency voltage 3.6/6kV ～ 26/35kV.
35kV 及以下交聯聚乙烯絕緣電力電纜
35kV Cross-linked polyethylene(xlpe)insulating power cable
產品特點 Product Features
產品標準 Standard
適用范圍 Applications
使用特性Operating characteristics
·工頻額定電壓U0/U 為3.6/6kV ～ 26/35kV。
·電纜導體的允許*zui高工作溫度為90℃。
·短路時（zui長持續時間不超5s）電纜導體的zui高溫度不
超過250℃。
·電纜敷設時環境溫度不低于0℃。
·電纜彎曲半徑：三芯電纜不小于電纜外徑15 倍；單芯電
纜不小于電纜外徑20 倍。
·Rated power frequency voltage U0/U:3.6/6kV ～ 26/35kV.
·Max.Permissible continuous operating temperature of conductor:90℃ .
·Max. short-circurt temperature of conductor shall not exceed 250℃ .
(5s maximum duration)
·The ambient temperature under installation should not below 0℃ .
·The bending radius of a single-core cable should not less than 20
times of the cable diameter.
·The bending radius of a three-core cable should not le