Electrical wire is sheathed in metal fire-retard tube, to prevent ignition caused by fire in batterytest.
Compression force can be set from 250N to 13KN, as per requirement in specific standard.
Equipped with test hole and tuyere;Through tuyere and fan,exhaust gas is cleared out,and
pressure equalized rapidly; Through Test hole, temperature and air pressure in test area can be measured easily.
Controller device is detached from test chamber;As a safety measure，the equipment is operated 1-2 meters from the test chamber.
標準依據Standard Basis
MT/T 1051-2007《礦燈用鋰離子蓄電池-擠壓試驗》
uL1642安全標準《壓縮測試》
uL 2054安全標準《壓縮測試》
GB/T 2900.11-1988礦燈用鋰離子蓄電池安全性能檢驗規范《擠壓》
YD 1268-2003移動通信手持機銼電池及充電器的安全要求《耐擠壓性能》
sJ/T 11169-1998鋰電池標準《擠壓試驗》
GB/T 8897.4-2002原電池第4部分肛電池的安全要求《擠壓》
SJ/T11170-1998家用及商用電池安全標準《擠壓》
DB 032-2009通信用后備式鋰離子電池組《抗擠壓》
QB/T 2502—2000鋰離子蓄電池總規范《擠壓(內部短路)試驗》
MTT 1051-2007 Compression test:Lithium-ion batteries for miner lamp;
UL1642 Compression test of Standard for Safety;
UL 2054 Compression test of Standard for Safety;
GB/T 2900.11-1988 Compression, safety inspection of lithium-ion batteries for miner lamp;
YD 1268-2003 Compression-resistance performance, safety requirement of batteries and chargers for handset,
SJ/T 11169-1998 Compression test of lithium-ion battery standards;
GB/T8897.4-2002 Compression, safety requirement for lithium-ion in part 4, galvanic battery;
SJ/T11170-1998 Compression, safety standard for household and commercial batteries;
YDB 032-2009 Compression resistance, lithium-ion battery for communication;
QB/T 2502—2000 Compression test(internal short-circuit), general specification of lithium-ion batteries;
