當前位置：蘭州海蘭德泵業有限公司>>>>MCN型磁力驅動內嚙合齒輪泵

MCN型磁力驅動內嚙合齒輪泵

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質生產商

所在地

在線詢價收藏產品查看聯系電話

聯系方式：查看聯系方式

更新時間：2022-07-01 15:08:33瀏覽次數：1920次

聯系我時，請告知來自環保在線

產品分類 品牌分類

暫無信息

蘭州海蘭德泵業有限公司

經營模式：生產廠家

商鋪產品：30條

所在地區：

詢價 給他留言

產品簡介

MCN型磁力驅動內嚙合齒輪泵　　MCN磁力驅動內嚙合齒輪泵　　MCNMagneticDrivenInternalGearPump　　MCN系列磁力驅動內嚙合齒輪泵是根據石油、化工、涂料、染料、油脂、醫藥、食品等行業的需求，研制開發的新型容積式泵，廣泛應用于不同性質、不同粘度的介質輸送，特別適用于高粘稠度介質的輸送

詳細介紹

MCN型磁力驅動內嚙合齒輪泵

　　MCN磁力驅動內嚙合齒輪泵
　　MCN Magnetic Driven Internal Gear Pump

　　MCN系列磁力驅動內嚙合齒輪泵是根據石油、化工、涂料、染料、油脂、醫藥、食品等行業的需求，研制開發的新型容積式泵，廣泛應用于不同性質、不同粘度的介質輸送，特別適用于高粘稠度介質的輸送。
　　MCN series magnetic driven internal gear pump is a new type positive displacement pump developed to meet the needs in petroleum, chemical, coating and dyestuff materials, grease, medicine and foodstuff industries, and is extensively used to convey media with different properties and different viscosity, especially suitable for media with high viscosity.

　　性能范圍The main specifications
　　流量 Flow                0.3～230m3/h
　　壓差 Differential Pressure   0.4～1.0MPa
　　介質溫度 Temperature        -20℃～+200℃
　　進口直徑 Inlet dia.                     15～200mm
　　粘度：Viscosity               5～10000cst

　　結構說明Description of structure

　　1.具有內齒的主動輪帶動有外齒的從動輪，在全封閉的泵腔內作同方向轉動，泵體和前蓋的月牙板將泵的吸入口和排出口隔開，齒輪轉動時在泵的吸入口形成負壓，液體被吸入，在泵的出口齒輪嚙合擠壓液體被排出，完成了液體的輸送。
　　1.The driving gear with inner teeth drives the driven gear with outer teeth, rotating in the same direction in the fully enclosed cavity. The swing link of the pump body and front cover separate the pump suction from the discharge. When the gears rotate, negative pressure is produced at the pump suction and liquid is sucked in, and discharge gears of the pump engages to extrude and discharge the liquid, completing the liquid conveying.

　　2.磁力驅動、全密封、無泄漏。
　　2.Magnetic driven, fully enclosed and leakage free.

　　3.輸送液體平穩、無脈動、振動小、噪音低。
　　3.Liquid conveying is stable, free of pulsation, with low vibration and noise.

　　4.泵的轉速與流量呈線性函數關系，可適當改變轉速來改變泵的流量。
　　4.The pump speed and flow are in linear function relationship, and the pump flow can be changed by changing the speed.

　　5.泵內所有轉動部件均利用輸送介質潤滑。
　　5.All rotating parts in the pump are lubricated by the media conveyed.

　　6.輸送易結晶物料時，可在泵體和前蓋上設置保溫夾套。
　　6.Insulation jacket can be provided at the body and front cover when materials likely to crystallize are conveyed.

　　7.用戶應在泵的出口設置旁通回流管線，并加裝安全閥，當泵或管路系統超壓時，安全閥自動打開，形成回流，保證系統安全。
　　7.Users should set up a bypass reflow circuit at the pump discharge, and mount a relief valve on it, and when the pump or piping system is over pressurized, the relief valve can open automatically to allow flow back, ensuring them system safety.